snmp_standard_mib
Instrumentation Functions for STANDARD-MIB and SNMPv2-MIB
The module snmp_standard_mib implements the instrumentation functions for the
STANDARD-MIB and SNMPv2-MIB, and functions for configuring the database.
The configuration files are described in the SNMP User's Manual.
Functions
configure(ConfDir) -> void()
ConfDir = string()
This function is called from the supervisor at system start-up.
Inserts all data in the configuration files into the
database and destroys all old rows with StorageType
volatile. The rows created from the configuration file
will have StorageType nonVolatile.
All snmp counters are set to zero.
If an error is found in the configuration file, it is
reported using the function config_err/2 of the error
report module, and the function fails with the reason
configuration_error.
ConfDir is a string which points to the directory
where the configuration files are found.
The configuration file read is: standard.conf.
inc(Name) -> void()
inc(Name, N) -> void()
Name = atom()N = integer()
Increments a variable in the MIB with N, or one if
N is not specified.
reconfigure(ConfDir) -> void()
ConfDir = string()
Inserts all data in the configuration files into the
database and destroys all old data, including the rows with
StorageType nonVolatile. The rows created from the
configuration file will have StorageType nonVolatile.
Thus, the data in the SNMP-STANDARD-MIB and SNMPv2-MIB, after this function has been called, is from the configuration files.
All snmp counters are set to zero.
If an error is found in the configuration file, it is
reported using the function config_err/2 of the error
report module, and the function fails with the reason
configuration_error.
ConfDir is a string which points to the directory
where the configuration files are found.
The configuration file read is: standard.conf.
reset() -> void()
Resets all snmp counters to 0.
sys_up_time() -> Time
Time = int()
Gets the system up time in hundredth of a second.